Product Description
The S5 Patrol finally looks good. No offense to Nissan but the older Y62 models didn't quite have a tough look about them, however the Series 5 fixed that with a much improved front end. Well the Cobra bar from Offroad Animal makes it look even better. You can give a serious face lift to your Patrol and give it that cool aggressive look that will make you smile every time you look at it. Not only does this bar look the part but it's super functional as well. A great platform for a winch and lights and does the job of protecting the front from animal strikes and offroad mishaps.
This bar suits Series 5 Y62 TI patrols from MY19 on, TI-L requires a few nutserts to be installed
MY22 vehicles requires grille cut
Y62 Warrior Replacement bash plate is available as an option
Benefits
- Full steel construction for ultimate protection, One piece design
- Much improved approach angle over factory bumper and all competitors
- Great platform for mounting a winch
- Ability to mount winch without removing the whole bar (great for winch servicing)
- Great platform for mounting lights or antennas
- Works with all parking sensors and Adaptive cruise, and Autonomous Emergency braking features.
- Looks awesome on the front of your Patrol
- Much lighter bar compared to main competitors due to our much smarter design
Features
- ADR compliant
- Airbag compatible
- Works with parking sensors, and Adaptive Cruise Radar
- Works with factory head light washers
- Welded one piece bar with welded wing supports for super toughness
- Zinc plated then powder coated Matte black as standard
- Hi lift jacking points integrated into design as standard
- Suits most winches up to 12,000lb with no extras required, including Warn Zeon
- Factory fog lights relocate into the bar
- Number plate flip included as standard for those running a winch
- Can be colour coded to vehicle
- Included as standard is Rated 20mm steel recovery points included as part of mounts, each point is rated to 4500kg
While the bumper takes most single row led light bars (we suggest the Offroad Animal 22" LED light bar)
Fitting time 4 hours
Fitting difficulty 5/10
Included in box
- 1 x Front bar weldment
- 1 x LH chassis impact bracket
- 1 x RH chassis impact bracket
- 1 x mesh fairlead mount
- 1 x Mesh infill LH
- 1 x Mesh infill RH
- 1 x Light cover Mesh LH
- 1 x Light cover Mesh RH
- 1 x centre bash plate
- 1 x under wing panel LH
- 1 x under wing panel RH
- 1 x winch control box bracket
- 1 x number plate flip
- 1 x ACC mount
- A butt load of nuts and bolts to make it all sit nice and pretty
*Fitting partner refers to approved Offroad Animal partners or authorised branded stores located closest to you. Once your order is placed, our team will contact you to confirm and direct you to your nearest suitable fitting location.
** Installation pricing is based on standard OEM
vehicles using generic wiring harnesses and switches. Any additional
requirements—including factory switch integration, custom wiring, or
non-standard accessories—may incur additional charges payable directly to the
fitting partner at the time of installation. Non-standard or additional items
(such as UHF units or other branded lighting and accessories) can also be
sourced and supplied directly through the fitting partner if required.
Freight: If selecting installation, please choose freight to the nearest fitting centre. If there is any discrepancy in the final
freight cost, this will be reviewed and adjusted accordingly.
Note: Some images depict prototype products. The actual final product may vary in appearance.
Colour-coded bars are not an exact paint match; the
finish will be a close approximation only. Please provide your VIN so we can
confirm the correct colour code. Note that selecting colour coding typically
adds an additional 4–6 weeks to the lead time.
If $9999 appears in the freight charge, please check address information is entered correctly as per Australia post.
