Product Description
The Offroad Animal Predator bar is a serious addition to your Ram designed to not only enhance it's already good looks but offer great protection, and application for mounting winches, lights and antenna. Don't drive around naked, get barred up with an Offroad Animal Predator bar.
Suits RAM 1500 DT 2025-on with 6-cylinder Hurricane motor.
Compatible with all models sold by RAM Trucks Australia - Laramie Sport, Rebel and Limited.
Laramie Sport requires LED marker lamp option to be selected.
Benefits:
- Looks. Yep this bad boy looks great and will give your Ram that Super aggressive look
- Smaller bar means it weighs less so your Ram can still be fast
- Completely made from Steel
- Better Airflow than the rest to keep your motor cool too.
- Easy fitment of bar and winch
- Winch can be fitted after bar is fitted so, yeah, nice
- Winch mounts feet down, (actually how most winches were designed,)
- Can have LED light bar fit inside bar for super stealth cool look (up to 32" LED single row)
- Can have LED light bar fitted into optional top stealth hoop, or spot lights to rally hoops
- Stout recovery points included
- Solid steel bash plate included
- 40kg removed from from Vehicle and 85kg added with bar so a net increase of only 45kg
- Only adds 120mm to front of vehicle over standard bumper
Features:
- ADR compliant
- Airbag compatible
- Works with all safety driving tech
- Optional top hoop- Stealth hoop which takes up to a 32" LED light bar single row
- Optional Rally hoop can take 4 lights.
- Welded one piece bar with welded wing supports for super toughness. Body is 3mm thick while mounts and winch cradle are 5mm
- Zinc plated then powder coated Matte black
- Hi lift jacking points included
- Suits most low mount winches including Warn Zeon and Carbon 15k winch. Does not suit Warn heavyweight series.
- Works with Parking sensors and all sensors
- Does not suit factory fog lights, however we suggest these ones Stedi Type A
- Number plate flip included for those running a winch
- Can be colour coded to vehicle
- 16mm High Tensile Steel tow hooks included as standard
- 4mm Alloy bash plate included as standard
While the bumper takes most single row led light bars, we suggest the Offroad Animal 32" LED light bar.
Stealth top hoop also fits up to a 32" single row Light bar, fitting most single row light bars, but again, we suggest the Offroad Animal 32" LED light bar. Please note this top stealth hoop will partially block the forward facing camera if equipped on vehicle. However, fear not, we have a camera extension harness so you can relocate the camera into the bullbar.
If you're really scared of the dark and two light bars isn't enough light for you, get our Quad Rally Hoop and mount two pairs of driving lights; 9-inch Ass Kicker LED lights in the middle, 7-inch Butt Kicker LED lights to the sides. Please note this rally hoop will partially block the forward facing camera if equipped on vehicle. However, fear not, we have a camera extension harness so you can relocate the camera into the bullbar.
Suits RAM 1500 DT 2025-on with 6-cylinder Hurricane motor.
Compatible with all models sold by RAM Trucks Australia - Laramie Sport, Rebel and Limited.
Laramie Sport requires LED marker lamp option to be selected.
Included in box:
- 1 x Front bar weldment
- 1 x LH chassis impact bracket
- 1 x RH chassis impact bracket
- 1 x mesh fairlead mount
- 1 x Mesh infill LH
- 1 x Mesh infill RH
- 1 x Light cover Mesh LH
- 1 x Light cover Mesh RH
- 1 x fog lamp bracket LH
- 1 x fog lamp bracket RH
- 1 x centre bash plate
- 1 x secondary bash plate
- 1 x under wing panel LH
- 1 x under wing panel RH
- 1 x Chassis bracket gusset LH
- 1 x Chassis bracket gusset RH
- 2 x Winch cradle supports
- 1 x centre pan support
- 1 x number plate flip
- 4 x parking sensor extension harnesses
- A butt load of nuts and bolts to make it all sit nice and pretty
Install time: 5-6 hours
Install difficulty: 7/10
Flare and bumper cut required. Grille cut required for certain winches.
*Fitting partner refers to approved Offroad Animal partners or authorised branded stores located closest to you. Once your order is placed, our team will contact you to confirm and direct you to your nearest suitable fitting location.
** Installation pricing is based on standard OEM
vehicles using generic wiring harnesses and switches. Any additional
requirements—including factory switch integration, custom wiring, or
non-standard accessories—may incur additional charges payable directly to the
fitting partner at the time of installation. Non-standard or additional items
(such as UHF units or other branded lighting and accessories) can also be
sourced and supplied directly through the fitting partner if required.
Freight: If selecting installation, please choose freight to the nearest fitting centre. If there is any discrepancy in the final
freight cost, this will be reviewed and adjusted accordingly.
Note: Some images depict prototype products. The actual final product may vary in appearance.
Colour-coded bars are not an exact paint match; the
finish will be a close approximation only. Please provide your VIN so we can
confirm the correct colour code. Note that selecting colour coding typically
adds an additional 4–6 weeks to the lead time.
If $9999 appears in the freight charge, please check address information is entered correctly as per Australia post.
